====== Installation ======
24V/1A DC is required to power converter. Standard consumption is lower, but switched-mode power supply requires high inrush current.

===== Peripherals description =====

----

{{ :sk:blackymax-connectors1.png?400|}}
  - Jumper - RS485 terminator
  - RS 485 [C-bus] connector
  - RS 232/MMI connector
  - Ethernet
  - USB Slave
  - **Do not connect**
  - Jumper - MMI power supply bridge between RS 232 DB9 and port 3.
  - Power supply 24V DC

=== RS 485 connector ===
  - **Shielding**
  - **A+**
  - **B-**
  - **GND**

{{ :en:konektor.png|}}
=== RS 232 connector ===
  - **GND**
  - **MMI power**
  - **TxD**
  - **RxD**

=== Power supply 24V DC ===
  - **-24VDC**
  - **+24VDC**
8-) With reverse polarity protection

----
{{ :sk:blackymax-connectors2.png?400|}}
  - RS 232 DB9 
  - USB Host
  - HDMI **Do not connect**
  - Micro SD slot
  - M-Bus

=== M-Bus connector  ===
  - M-Bus
  - M-Bus
8-) With protection against overvoltage and short circuit
\\
:!: In the event of prolonged short-circuit situation, converter will reduce output voltage. To restore converters function it is required to break converters power supply.
----
=== Linux  COM port names ===

    RS485 - /dev/ttyO5
    M-Bus - /dev/ttyO4
    RS232 DB9 - /dev/ttyO1
    RS232 MMI - /dev/ttyO2

----

===== First run =====
:!: From factory settings, converters IP address is set to **192.168.0.202**. You will be able to connect to converter by setting your IP address in range **192.168.0.XXX** with net mask set to **255.255.255.0**

Converter requires about 1 minute to start all services with web interface.
Web inteface should be accessible on web address **http://192.168.0.202**
\\
Login page will be displayed after successfull connection.
{{ :en:blackymax-login.png?200|}}
\\
Default credentials are:
\\
Username: **root**
\\
Password: **123**
\\
By pressing **Login** button you will log in.
\\
:!: It is recommended to immediately change default password, especially when device is visible on public network
\\
8-) Credentials to web interface are identical with credentials used for ssh. 
===== Changing password =====
You can change your pasword by clicking on your username located in menu below logo. Small context menu should pop up with option to **Change password**.
{{ :en:blackymax-login-zmena.png?200 |}}

----

===== Changing system language =====
{{:sk:language.png?400|}}

----

===== Integrated helper =====
{{:sk:help.png?400|}}

----

You can also access integrated helper by directly accessing following links, each for different language:
\\
''<converters IP>/wiki/sk/blacky_max.html''
\\
''<converters IP>/wiki/en/blacky_max.html''
\\
''<converters IP>/wiki/de/blacky_max.html''